BACKRUSH  대화방입장  유닉스명령  다음  자료실  Ascii Table   Exploit   원격접속  달력,시간   프로세스  
지하철노선   Whois   RFC문서   SUN FAQ   SUN FAQ1   C메뉴얼   PHP메뉴얼   너구리   아스키월드 아이피서치

글쓴이: sun sun IPMP 조회수: 11575





activate ethernet interface

# ifconfig ce0 plumb

# ifconfig ce1 plumb



Giving IP Address and IP Multipathing

# ifconfig ce0 10.172.75.2 netmask 255.255.255.0 broadcast + group ipmp1
up



# ifconfig ce1 group ipmp1 up



Now we only have 1 IP address ( 10.172.75.2 ).



If this setting keep on when system reboot, check all following conf
file.



# more /etc/hosts

127.0.0.1 localhost

10.172.75.2 server01



# more /etc/netmasks

10.172.75.0 255.255.255.0



#more /etc/defaultrouter

10.172.75.1



# more /etc/hostname.ce0

server01 netmask + broadcast + group ipmp1 up



For active-active configuration :

# more /etc/hostname.ce1

group ipmp1 up



For active-passive configuration :

# more /etc/hostname.ce1

group ipmp1 standby up



Check network interface status for active-active :

# ifconfig -a

ce0: flags00843 mtu 1500 index 4

inet 10.172.75.2 netmask ffffff00 broadcast 10.172.75.255

groupname ipmp1

ether xx:xx:xx:xx:xx:xx

ce1: flags00843 mtu 1500 index 5

inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255

groupname ipmp1

ether xx:xx:xx:xx:xx:xx



Check network interface status for active-standby :

# ifconfig -a

ce0: flags00843 mtu 1500 index 4

inet 10.172.75.2 netmask ffffff00 broadcast 10.172.75.255

groupname ipmp1

ether xx:xx:xx:xx:xx:xx

ce0:1: flags00843 mtu 1500 index 4

inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255

ce1: flagsi000842 mtu 0 index 5

inet 0.0.0.0 netmask 0

groupname ipmp1

ether xx:xx:xx:xx:xx:xx TopBest Answer 0

Mark this reply as the best answer?
(Choose carefully, this can't be changed)
Yes | No
Gary Jarrell replied Mar 23, 2010
Requires two hostname.xxx files
Requires 3 IP addresses on the same LAN, and you must be able to ping the default GW


hostname.<primary>
<real ip> deprecated -failover netmask <netmask> broadcast <broadcast> group <GROUP> up \
addif <virtual> netmask <netmask> broadcast <vip> up

hostname.<secondary>
<real ip> netmask broadcast group <GROUP> deprecated -failover standby up

to verify bounce the box. You can also restart the network services and it should pick it up as well.

관련글 : 없음 글쓴시간 : 2012/08/02 12:02 from 183.109.84.23

  AIX alert log clear 목록보기 새글 쓰기 지우기 응답글 쓰기 글 수정 windows installer 에러 복구  
BACKRUSH  대화방입장  유닉스명령  다음  자료실  Ascii Table   Exploit   원격접속  달력,시간   프로세스  
지하철노선   Whois   RFC문서   SUN FAQ   SUN FAQ1   C메뉴얼   PHP메뉴얼   너구리   아스키월드 아이피서치